SIDENOR’s Wire Rod is produced at the Thessaloniki plant, by ultra-modern machinery and highly skilled experienced personnel.

The grades that are produced follow:
• SAE 1006 according to ASTM A510M
• SAE 1008 according to ASTM A510M
• SAE 1010 according to ASTM A510M
• ELECTRODE QUALITY (USD 7) according to DIN 17145
• S235JR according ΕΝ 10025 (RSt 37-2 according DIN 17100)

SIDENOR’s Wire Rod is appropriate for a vast range of cold-drawing and covers all the needs of the low- carbon wire products industry.

CHARACTERISTICS

TYPE: Hot-Rolled Wire Rod
STEEL GRADE: 1) SAE 1006 according to ASTM A510M
2) SAE 1008 according to ASTM A510M
3) SAE 1010 according to ASTM A510M
4) ELECTRODES (USD 7) according to DIN 17145
5) S235JR acc. EN10025 (RSt 37-2 according to DIN 17100)
FORM – DIAMETER: Coils diameters from ØΦ5.5 to Ø16mm
COIL WEIGHT: Approximately 1,250 to 1,450kg
DIMENSIONS, WEIGHTS & TOLERANCES: According to DIN 59110

 

CHEMICAL COMPOSITION OF WIRE ROD STEEL GRADES

STEEL GRADE C (%) max Mn (%)

max

S (%) max P (%) max Si (%) max Cr (%) max Ni (%) max Cu (%) max TYPICAL USES
SAE 1006 0.080 0.300 – 0.400 0.025 0.020 0.080 0.100 0.100 0.150 Black & galvanized wires, small nails
SAE 1008 0.090 0.300 – 0.500 0.030 0.020 0.100 0.150 0.150 0.250 Black & galvanized wires, nails, galvanized fencing mesh
SAE 1010 0.100 0.400 – 0.600 0.040 0.025 0.150 0.200 0.200 0.350 Concrete reinforcing light mesh, nails, galvanized fencing mesh
ELECTRODES 0.090 0.400 – 0.600 0.025 0.020 0.050 0.100 0.100 0.150 Coated welding electrodes (according to DIN 17145 / USD7)
S235JR 0.120 0.400 – 0.650 0.040 0.025 0.200 0.200 0.200 0.400 Concrete reinforcing wire mesh

 

DIMENSIONS, WEIGHTS AND TOLERANCE OF WIRE ROD

DIAMETER d (mm) PERMISSIBLE DEVIATION (mm) NOMINAL CROSS-SECTION (cm2) NOMINAL WEIGHT (Kg/m) PERMISSIBLE OUT-OF-ROUNDNESS (mm)
5.5 ± 0.3 0.238 0.187 0.480
6.0 ± 0.3 0.283 0.222 0.480
6.5 ± 0.3 0.332 0.260 0.480
7.0 ± 0.4 0.385 0.302 0.640
8.0 ± 0.4 0.503 0.395 0.640
9.0 ± 0.4 0.636 0.499 0.640
10.0 ± 0.4 0.785 0.617 0.640
11.0 ± 0.4 0.950 0.746 0.640
12.0 ± 0.4 1.130 0.888 0.640
14.0 ± 0.4 1.540 1.210 0.640
16.0 ± 0.5 2.010 1.580 0.800
For Balkan Region

SIDENOR STEEL INDUSTRY SA (THESSALONIKI) – Export Dept.

Address: 12th km National Road Thessaloniki-Veria
Postal Code: GR-57008
City: Thessaloniki
Area: Ionia
Country: GREECE
Telephone: (+30)-2310-790111
Fax: (+30)-2310-722288
e-mail: svlahothan@sidenor.vionet.gr

 

 

For Rest of World

SIDENOR STEEL INDUSTRY SA (ATHENS) – Export Dept.

Address: 33, Amaroussiou-Chalandriou street
Postal Code: GR-15125
City: Athens
Area: Attiki
Country: GREECE
Telephone: (+30)-210-6787111
Fax: (+30)-210-6787740
e-mail: tmalakis@sidenor.vionet.gr